1-800-438-6013

Milwaukee M12™ Cordless LITHIUM-ION No-Hub Drill/Driver

Milwaukee M12™ Cordless LITHIUM-ION No-Hub Drill/Driver

$276.56 

With specific torque settings for 60 and 80 in/lbs, the M12™ Cordless LITHIUM-ION No-Hub Driver is specifically designed to quickly install no-hub couplings with accuracy and repeatability. The first of its kind in the industry, the 2455-22 can fasten up to 300 clamps on a single charge and is proven to be accurate for up to 25,000 clamps before re-calibration.

Includes

  • 2455-20 M12™ Cordless LITHIUM-ION No-Hub Coupling Driver
  • (3) Shockwave™ Sockets (1/4'', 5/16'', 3/8'')
  • (2) M12™ RED LITHIUM™ Batteries
  • 30-Minute Charger
  • Carrying Case

FEATURES

  • Specific Torque Settings for 60 and 80 in-lbs - Fast accurate installtion of no-hub couplings
  • Auto Shut-Off w/ LED Indicator - Alerts users that torque limit has been achieved
  • LED Calibration Indicator - Alerts user when calibration is needed (25,000 cycles)
  • 0-750 RPM Drill Mode - Increased utility for general drilling and fastening
  • M12™ RED LITHIUM™ Battery - Fastens up to 300 steel clamps on a single charge
  • Compact/Lightweight Design - Reduces user fatigue at only 2.75 lbs

 

 

SPECIFICATIONS

Voltage 12V
No Load Speed 0-250/0-750 RPM
Chuck Type 1/4 Hex
Torque Settings 60 in-lbs and 80 in-lbs
Drill Mode Yes
On Board Fuel Guage Yes
LED Light Yes
LED Torque Indicator Yes
LED Calibration Indicator Yes
Battery LITHIUM-ION
Charge Time 30 minutes
No of Batteries Included (2) M12™ RED LITHIUM™ Batteries
Tool Weight 2.75 lbs
Shipping Weight 7.66 lbs

With specific torque settings for 60 and 80 in/lbs, the M12™ Cordless LITHIUM-ION No-Hub Driver is specifically designed to quickly install no-hub couplings with accuracy and repeatability. The first of its kind in the industry, the 2455-22 can fasten up to 300 clamps on a single charge and is proven to be accurate for up to 25,000 clamps before re-calibration.

Includes

  • 2455-20 M12™ Cordless LITHIUM-ION No-Hub Coupling Driver
  • (3) Shockwave™ Sockets (1/4'', 5/16'', 3/8'')
  • (2) M12™ RED LITHIUM™ Batteries
  • 30-Minute Charger
  • Carrying Case

FEATURES

  • Specific Torque Settings for 60 and 80 in-lbs - Fast accurate installtion of no-hub couplings
  • Auto Shut-Off w/ LED Indicator - Alerts users that torque limit has been achieved
  • LED Calibration Indicator - Alerts user when calibration is needed (25,000 cycles)
  • 0-750 RPM Drill Mode - Increased utility for general drilling and fastening
  • M12™ RED LITHIUM™ Battery - Fastens up to 300 steel clamps on a single charge
  • Compact/Lightweight Design - Reduces user fatigue at only 2.75 lbs

 

 

SPECIFICATIONS

Voltage 12V
No Load Speed 0-250/0-750 RPM
Chuck Type 1/4 Hex
Torque Settings 60 in-lbs and 80 in-lbs
Drill Mode Yes
On Board Fuel Guage Yes
LED Light Yes
LED Torque Indicator Yes
LED Calibration Indicator Yes
Battery LITHIUM-ION
Charge Time 30 minutes
No of Batteries Included (2) M12™ RED LITHIUM™ Batteries
Tool Weight 2.75 lbs
Shipping Weight 7.66 lbs

Featured Product:  1
stock status:  stock
group stock:  non-stock
Type:  simple
This product was added to our catalog on Thursday 21 June, 2018.
There are currently no product reviewsWrite a review on this product!