Lewis Regular Duty Ball Bearing Swivels - Working Load 5,000 lbs, Approx Breaking Strength 15,000 lbs.

Lewis Regular Duty Ball Bearing Swivels - Working Load 5,000 lbs, Approx Breaking Strength 15,000 lbs.

SKU: W-1

Quick Overview

Either "W" series (Regular Duty) are specifically designed for tension stringing and assure the conductor will remain in the neutral position during stringing of transmission and distribution lines. These twin race ball bearing swivels are manufactured from high-grade prestressed steel. Proper placement of thrust and radial bearing allow thrust and shock loads to be without affecting rotation of swivel. Pins are screwdriver removable.

WARNING: It is important that you read and understand all breaking strength, safety, and technical data relating to all Lewis Manufacturing Company products. Please order carefully. Lubricate all greasable swivels before and after each use. Do not exceed published working load on any Lewis ball bearing swivel.

Please refer to the image to see dimensions
Regular Duty Swivel:

  • W-1
    • Overall Length (A): 5 3/8"
    • Diameter of Pin (B): 7/16"
    • Jaw Opening (C): 5/8"
    • Overall Diameter (D): 1 5/16"
    • WLL: 5,000 lbs.
    • Approximate Breaking Strength: 15,000 lbs.
$191.14 

Either "W" series (Regular Duty) are specifically designed for tension stringing and assure the conductor will remain in the neutral position during stringing of transmission and distribution lines. These twin race ball bearing swivels are manufactured from high-grade prestressed steel. Proper placement of thrust and radial bearing allow thrust and shock loads to be without affecting rotation of swivel. Pins are screwdriver removable.

WARNING: It is important that you read and understand all breaking strength, safety, and technical data relating to all Lewis Manufacturing Company products. Please order carefully. Lubricate all greasable swivels before and after each use. Do not exceed published working load on any Lewis ball bearing swivel.

Please refer to the image to see dimensions
Regular Duty Swivel:

  • W-1
    • Overall Length (A): 5 3/8"
    • Diameter of Pin (B): 7/16"
    • Jaw Opening (C): 5/8"
    • Overall Diameter (D): 1 5/16"
    • WLL: 5,000 lbs.
    • Approximate Breaking Strength: 15,000 lbs.

There's no reviews for this product, be the first to write a review.

Write a review

From:
Email:
Your Review:

Rating: BAD GOOD

Verify Security Code
Type Security Code Here: Verify Security Code

 *

Customers who bought this product also purchased